A Mercer company - serving Woodland Hills, CA

Tamko Roofing Company Nationwide

Metal roofingMetal roofing
Architectural shinglesArchitectural shingles
Tile roofingTile roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

Tamko Roofing Company in Woodland Hills: What to Know First

We provide independent Tamko roofing company services in Woodland Hills, handling everything from storm-damage repair to full tear-off and replacement with Tamko shingles. Most Tamko roof repairs take a single day once we’re on the roof, and you’ll always get a written price before any work starts. If you’re noticing curling shingles, granule loss in your gutters, or water stains on the ceiling below a Tamko roof, call (341) 217-2677 for a free estimate. This page is for Woodland Hills homeowners with Tamko roofs who want straight answers about repair costs, failure patterns, and whether a patch job will actually hold.

Call (341) 217-2677

How Tamko Products Fail – and How We Fix Them

Tamko builds solid shingles, but like every brand, they have predictable failure modes once Southern California heat and Santa Ana winds get involved. Here’s what we see on Tamko roofs across Woodland Hills:

  • Heritage series granule shedding within the first decade. The Heritage line’s colored granules are applied with a ceramic coating that’s meant to resist UV, but in Woodland Hills we see roofs where prolonged sun exposure on south-facing slopes causes premature granule loss. You’ll notice a patchy, lighter color on one side of the roof and fine grit building up in the gutters. The fix is usually a section replacement on the affected slope, not a whole roof. We match the existing Heritage color from Tamko’s current production line, and we’re honest when a full replacement makes more sense than chasing patches.
  • Elite Glass-Seal lifting at the nail line after wind cycles. Tamko’s Elite Glass-Seal series uses a fiberglass mat that’s strong but can lift at the nail line if the original installer over-drove nails or placed them outside the reinforced zone. During Santa Ana wind events, we see shingles peel back in rows. The repair means removing the affected rows and re-nailing with the correct fasteners in the correct placement. We check the entire slope for nail-pattern issues, because if one row lifted, the rows above and below were likely nailed the same way.
  • StormFLEX or metal flashing seal failure at valleys and pipe boots. Tamko’s membrane products hold up well, but the seal where they meet metal flashing breaks down after years of temperature swings. Water creeps in at the valley and travels along the decking before it shows up inside. We replace the flashing and re-seal the membrane connection. On Tamko jobs, we always inspect every penetration, not just the one that’s leaking, because a roof that’s showing one seal failure usually has two or three more close behind it.
  • Decking rot under Tamko shingles due to poor attic ventilation. This isn’t Tamko’s fault – it happens under every shingle brand – but we mention it because Woodland Hills homes built in the 1970s and 1980s often have marginal attic airflow. Heat builds up under the decking, cooks the shingles from below, and accelerates aging. We see blown-in insulation blocking soffit vents on a lot of these homes. The shingle failure is the symptom; the ventilation is the cause. We’ll tell you which is which before we quote anything.
  • Wind-driven rain leaks at hip and ridge intersections on Heritage and Elite roofs. Hip and ridge caps take the worst of the wind from every direction. Once the adhesive strips on the caps degrade, rain gets driven sideways under the caps and follows the nail shafts down. We replace the hip and ridge caps, and we re-seal the underlying field shingles with a roofing-grade sealant at the intersection. We don’t re-use old caps even if they look okay – the adhesive is spent.
Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Our Tamko Roofing Company Process

Here’s exactly how a Tamko repair goes with Mercer Roofing Co Woodland Hills, from the first call to the final walk-around:

  1. 1
    You call (341) 217-2677 and describe what you’re seeing. A live person answers, 24/7. We ask about the age of the roof, the Tamko line if you know it, and where the problem is showing up inside or outside.
  2. 2
    We schedule the visit and send the technician’s name and photo before we arrive. When our tech shows up at your door in Woodland Hills, they’re in a clean, marked uniform and they’ll present a photo ID badge before stepping foot on your property. No surprises at the door.
  3. 3
    The technician does a full roof inspection, not just a spot check at the leak. We look at the failure, then we walk the entire roof. On a Tamko job, we check nail patterns, flashing seals, granule loss, and attic ventilation. The leak might be at one valley while the roof is telling us something else entirely.
  4. 4
    You get a written price before any work starts. We make the repair decision together: a targeted fix if the roof has years of life left, or an honest conversation about replacement if you’re chasing multiple failures. We’ll put the number in writing and explain what moves it.
  5. 5
    We do the work, then we test it. For leak repairs, we water-test the repaired area before we leave. For shingle and flashing work, we check that everything is seated, sealed, and nailed to manufacturer spec.
  6. 6
    You get a written guarantee on every repair. If the repair fails within 365 days, we come back and make it right at no cost. That’s our 365-Day Done Right Promise, and it’s in writing, not a verbal assurance.

What Tamko Roofing Company Costs in Woodland Hills

Tamko roof repair in Woodland Hills typically runs between $350 and $1,200 for most service calls. A full Tamko Heritage or Elite Glass-Seal tear-off and replacement on a standard 1,800 to 2,500 square foot single-story home runs $11,000 to $18,000 depending on decking condition, slope, and ventilation work. Here’s the breakdown:

  • Minor shingle repair (curled, cracked, or missing shingles in one area): $350 – $650
  • Flashing repair or pipe boot replacement: $400 – $800 per penetration
  • Section replacement (one roof slope with granule loss or wind lift): $1,800 – $4,200
  • Hip and ridge cap replacement: $900 – $2,100
  • Full Tamko roof replacement: $11,000 – $18,000, with decking repairs adding $2 – $4 per square foot as needed

What moves the price? The slope and accessibility of your roof, the number of penetrations, whether decking needs replacement, and whether attic ventilation has to be corrected to keep the new Tamko roof from cooking itself. Nobody should quote you a roof over the phone. Call (341) 217-2677 and we’ll give you a written estimate after we’ve walked the roof.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Why Woodland Hills Homeowners Call Mercer Roofing Co Woodland Hills for Tamko Work

Most roofing companies in the Valley can nail a shingle down. What sets us apart on Tamko work is the way we handle the person side of the job. Every technician we send is background-checked and identity-verified under the Threshold Verified standard, and you’ll see their name and photo before they arrive. When they walk up to your door, they’ll have a photo ID badge. That’s specific, and it’s true for every visit, not just some of them.

Grant Whitlock, our owner, has been putting roofs on homes across Woodland Hills for well over a decade. He learned the trade through Los Angeles Trade-Technical College’s construction technology program, and he’s spent enough time on Warner Center corridor roofs to know exactly what San Fernando Valley heat does to a Tamko shingle. Grant’s approach is straightforward: he’ll tell you when a repair is enough and when it’s not, and he’ll put it in writing before anyone picks up a nail gun. A roof should be the last thing you worry about. Let’s make sure it is.

We work with Tamko every week, and we also install and repair GAF, Owens Corning, and CertainTeed. That matters because when a Tamko color line gets discontinued or a matching bundle isn’t available, we’re not stuck – we know which alternative from another manufacturer matches closest, and we’ll tell you before we order anything.

FAQs

Contact Mercer Roofing Co Woodland Hills for Tamko Roofing Company

If you have a Tamko roof that’s showing wear – or you just want a straight answer on whether it’s fine to leave it alone – call (341) 217-2677 to schedule a free estimate. You’ll talk to a live person, get a written price before any work starts, and know exactly who’s coming to your door before they arrive. That’s how we do every Tamko job in Woodland Hills.

Written by Grant Whitlock, Owner, Mercer Roofing Co Woodland Hills at Mercer Roofing Co Woodland Hills, serving Woodland Hills and nearby areas.

Need Roofing help in Woodland Hills? Licensed & insured · Written quotes before work starts response · free estimates
Call (341) 217-2677
Local Service Coverage

Request a Free Estimate in Woodland Hills

Tell us what you need - Mercer Roofing Co Woodland Hills responds fast. No obligation.

By submitting this form, you agree to our Privacy Policy and consent to receive communications through phone, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch