A Mercer company - serving Woodland Hills, CA

Tamko Roof Repair Nationwide

Metal roofingMetal roofing
Architectural shinglesArchitectural shingles
Tile roofingTile roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

Tamko Roof Repair in Woodland Hills: What to Know First

Tamko roof repair in Woodland Hills typically runs between $350 and $1,600 depending on whether you’re dealing with a blown-off shingle, a valley leak, or failing flashing around a vent. Most repairs take one visit, and we carry common Tamko colors on the truck so we’re not asking you to wait on a special order. Our repairs come with a written guarantee, not a handshake.

Call (341) 217-2677

This page is for homeowners whose homes were built or re-roofed with Tamko shingles, who’ve noticed a leak, a missing shingle, or granule loss in the gutters, and who want a repair done once. Call us at (341) 217-2677 and we’ll send a Tamko-experienced technician with a written price before any work starts.

How Tamko Products Fail – and How We Fix Them

Tamko makes a solid shingle, but like every manufacturer, certain lines have failure patterns that are predictable once you’ve repaired enough roofs across Woodland Hills. We know what to look for on each series.

  • Heritage and Heritage II granule loss: These architectural shingles hold up well in the Valley, but we regularly see premature granule shedding on south-facing slopes in Woodland Hills. The cause is usually repeated heat cycling, not a manufacturing defect. Losing granules exposes the asphalt to UV and accelerates cracking. We replace the damaged shingles and check surrounding courses for loose granules that haven’t yet released, so you’re not back up there in six months.
  • MetalWorks stone-coated steel seam separation: In the Warner Center corridor, where summer roof temps climb past 140 degrees, metal panels expand and contract. On Tamko MetalWorks systems, we’ve found that poorly lapped seams from the original install will open up over time. Water gets under the panel and runs to places that have nothing to do with where the drip shows up on the ceiling. The fix is re-lapping the seam with the correct underlayment and mechanically fastening, not just smearing sealant.
  • Elite Glass-Seal 3-tab sealant failure: The 3-tab lines use a heat-activated sealant strip. On newer Woodland Hills installs with good attic ventilation, we see fewer failures. But on older homes with poor airflow, the sealant lets go and wind lifts the tabs. We replace the lifted shingles with a matching option and often recommend a ventilation check because the heat itself is the problem.
  • Flashing and fastener failures at valleys and curbs: This isn’t specific to Tamko, but it shows up on every Tamko roof we repair. The original installer used a generic valley metal that’s since corroded through or pulled away at the seams. We replace the flashing with 26-gauge metal and step-flash the shingle courses properly. The shingle itself is rarely the leak source; it’s the transition.
  • Improper nail placement from the original install: We see this most often on homes that were re-roofed fast during a busy season. Nails driven too high, over-driven fasteners popping through the shingle face, or too few nails per shingle. On Tamko Heritage, the nail line is marked on the shingle. When nails miss it, shingles slide over time. We correct the nailing pattern on repair sections and document what we find so you can decide whether the repair is enough or whether the roof needs a larger rework.
Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Our Tamko Roof Repair Process

Every Tamko repair in Woodland Hills follows the same sequence, and you get the written version before we start.

  1. 1
    Call and schedule: A live person answers. You tell us what you’ve seen, we set a time, and you get the technician’s name and photo before they ring the bell.
  2. 2
    Diagnostic inspection: Our technician checks the leak source, not just the spot where water is showing up inside. On Tamko roofs, the point of entry is usually upslope from the stain.
  3. 3
    Written price and parts decision: If the matching Tamko shingle is still available, we quote using it. If it’s discontinued (some Elite and 3-tab colors are no longer manufactured), we’ll show you the two closest-match options and quote the one that blends best.
  4. 4
    The repair: We remove only what’s necessary, replace underlayment in the affected area, re-secure or replace flashing, and install the new shingles to meet Tamko’s nailing pattern.
  5. 5
    Water test and seal: We run water along the repair area to confirm the leak is stopped before we come down off the roof.
  6. 6
    Paperwork and cleanup: We walk the roof with you in photos, show what was done, and hand you the written workmanship guarantee with our name on it.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Tamko Roof Repair Costs in Woodland Hills

These are the price ranges we quote most in Woodland Hills for Tamko repairs. Actual price depends on access, pitch, and how far upslope the water traveled.

  • Single shingle replacement (match in our truck stock): $350 – $550
  • Vent boot replacement and reseal: $400 – $700
  • Flashing repair at valley or curb: $600 – $1,200
  • Leak in three-tab section with decking spot repair: $800 – $1,600
  • Flat roof patch on a Tamko-modified bitumen or membrane corner: $450 – $850

What moves the price: roof pitch and access (steep or tile-adjoining sections cost more), decking rot hidden under the shingle, and whether we’re matching a discontinued color. Every quote is written before work starts and includes our 365-day guarantee on the repair. Call (341) 217-2677 for a free estimate, and we’ll send a price you can hold us to.

Why Woodland Hills Homeowners Call Mercer Roofing Co Woodland Hills for Tamko Work

We carry Tamko stock because enough homes in Woodland Hills have it, but we also carry GAF, Owens Corning, and CertainTeed product. That matters when your Tamko color is no longer in production and we need something that blends without looking like a patch.

Every technician we send shows up in a clean uniform with a photo ID and a name you already know, because we sent it to you before the visit. The Threshold Standard is what we call that vetting process, and we don’t waive it. If the repair fails within 365 days, we return and fix it with no second invoice. That’s our Done Right Promise, and it’s in writing on every Tamko repair we complete. Grant Whitlock started this company after years of watching Valley homeowners pay twice for the same leak, and most of our Tamko repair calls come from people who were told they’d need a whole new roof by someone who sold roofs, not repairs.

FAQs

Need Roofing help in Woodland Hills? Licensed & insured · Written quotes before work starts response · free estimates
Call (341) 217-2677
Local Service Coverage

Request a Free Estimate in Woodland Hills

Tell us what you need - Mercer Roofing Co Woodland Hills responds fast. No obligation.

By submitting this form, you agree to our Privacy Policy and consent to receive communications through phone, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch