Owens Corning Roofing Company Nationwide

Owens Corning Roofing Company in Woodland Hills: What to Know First

Owens Corning roof repair and installation in Woodland Hills typically runs $350 – $1,100 for repairs and $12,500 – $28,000 for a full replacement, depending on which shingle line you have and what’s failed. We’re an independent Owens Corning service provider, not a manufacturer-authorized dealer, which means we fix what’s actually wrong without steering you toward a full tear-off when a repair is the honest call. Most Owens Corning repairs we schedule are completed in a single visit because we stock the common failure parts before rolling out.

Call (341) 217-2677

This page is for homeowners who have an Owens Corning roof, want straight answers about what it takes to fix or replace it, and want to know exactly who’s showing up at the door. Call (341) 217-2677 and you’ll get a live person, not a voicemail.

• Free estimate on every Owens Corning job with a written price before any work starts
• 365-Day Done Right Promise on every repair, in writing
• Background-checked, photo-badged technicians whose name and photo we send you before arrival

How Owens Corning Products Fail – and How We Fix Them

Owens Corning makes a solid shingle, but Woodland Hills heat and Santa Ana wind cycles expose specific weak points faster than a mild coastal climate would. Here’s what we actually see on Owens Corning roofs across the Valley:

• Duration Series granule loss on southern exposures. The Duration line holds up well overall, but on steep south-facing slopes we regularly see premature granule shedding within 8 – 12 years from UV exposure that bakes the asphalt layer. The shingle still sheds water, but it loses impact resistance and color. We document granule loss with photos, check the remaining shingle thickness, and tell you honestly whether you’re looking at monitor-and-wait or a targeted slope replacement.
• Oakridge series sealant strip failures after heat cycling. Oakridge shingles rely on a thermal sealant strip to bond each course. After years of 100-degree days followed by cool nights, that sealant can lose tack along eaves and rakes. The result is lifted shingle tabs that catch wind. The fix is a hand-seal with a compatible adhesive, done course by course, not a full resheet. It’s a repair that takes a few hours and costs far less than a replacement.
• TrueDefinition shadow line curling at the rake edge. The laminate profile that gives TrueDefinition its depth also creates a thicker shingle edge. At the gable rake, wind-driven debris and repeated expansion stress that exposed edge, causing curl-back before the field shingles show wear. We address it by replacing the rake perimeter shingles and installing a wider drip edge if the original one is undersized, which it often is on 2000s-era tract builds in Woodland Hills.
• VentSure Ridge Vent failures that get blamed on the shingles. When homeowners see staining or leaks near the ridge, they assume the shingles failed. In a lot of Owens Corning roofs we inspect, the actual culprit is a crushed or improperly fastened VentSure ridge vent. Heat warps the plastic components, the vent separates from the shingle, and water follows the gap. We remove the damaged vent section, check the decking underneath for rot, install a new ridge vent, and re-shingle the ridge cap with matching Owens Corning materials.
• Decking rot under Owens Corning shingles on older Woodland Hills homes. The shingles themselves weren’t the problem; the underlayment and OSB decking were. Many Woodland Hills homes built in the 1970s and 80s used thinner decking that, once it gets wet from a failed pipe boot or valley flashing, rots under otherwise healthy shingles. We find this during leak investigations because we check the decking from the underside in the attic, not just from the roof surface. If the decking is soft, that section gets replaced before new shingles go down.

Our Owens Corning Roofing Company Process

Here’s how a typical Owens Corning job runs with Mercer Roofing Co Woodland Hills, from first call to final photo:

1. 1
   You call (341) 217-2677 and talk to a live person. No call-back forms. We get the address, the age of the roof, and the symptom: leak, missing shingles, granule piles in the gutter, wind-lifted tabs.
2. 2
   We send you your technician’s name and photo before we arrive. When we knock, you’ll already know who’s at the door. The tech presents a photo ID badge, wearing a clean Mercer uniform.
3. 3
   On-site diagnosis with attic inspection. Grant Whitlock and the crew check the roof surface and the attic underside. We trace water stains, check decking condition, and identify exactly which Owens Corning component failed. You get photos of everything we find.
4. 4
   Written price before any work starts. No ballparks, no “we’ll see how it goes.” The line-item price is in writing and it does not change once the job begins unless you approve a change in scope.
5. 5
   Repair or replacement with the right parts. For Owens Corning work, we use OEM shingles and components when color match and warranty continuity matter, and quality aftermarket flashing, vents, and underlayment where they perform identically for less. We’ll tell you which is which and why.
6. 6
   Post-work photos, cleanup, and your 365-day written guarantee. We walk the job with you, show the finished work, and hand you a written guarantee. If a repair fails within 365 days, the second visit is free.

What Owens Corning Roofing Company Costs in Woodland Hills

Here are honest ranges for the Owens Corning work we do regularly in Woodland Hills:

• Shingle repair (small, isolated): $350 – $650
• Sealant strip hand-sealing (per slope): $400 – $800
• Ridge vent replacement with re-shingled ridge cap: $850 – $1,400
• Valley flashing replacement with new Owens Corning shingles: $900 – $1,800
• Full Owens Corning Duration or Oakridge replacement: $12,500 – $28,000 depending on square footage, tear-off, decking condition, and slope complexity

What moves the price is decking condition, the number of valleys and penetrations, and whether you want OEM Owens Corning accessories or quality aftermarket components. High slopes add labor cost because of fall protection requirements. The estimate is free, and the written price never changes once you approve it. Call (341) 217-2677 for an exact number on your roof.

Why Woodland Hills Homeowners Call Mercer Roofing Co Woodland Hills for Owens Corning Work

We know Owens Corning roofs because Grant Whitlock has been putting them on and fixing them across Woodland Hills for well over a decade, from the ridge apartments near Warner Center to the hillside homes off Mulholland. We also service GAF and CertainTeed systems, so when an Owens Corning component isn’t the right long-term answer on a mixed-brand roof, we’re not guessing. We’re comparing against other manufacturers we work with every week.

Every Owens Corning job carries a written guarantee. If the repair fails within 365 days, the second visit is free. Before any work starts, you have a written price. Before any technician arrives, you have their name and photo. A roof should be the last thing you worry about. Let’s make sure it is.

FAQs